Pauline
Articles
-
My Toilet Flush Valve Does Not Close Properly
If the flush valve is not sealing the water in the tank and causes a constantly running toilet, this may be due to the following issues. NOTE: Before proceeding with any work, turn off the water su...
-
My Vitreous China Product Is Cracked
If you've noticed a crack in any one of our vitreous china products, the item may need to be replaced. Identify your product model and if your product is within the warranty, you may contact our cu...
-
Gerber VC Performance
Every Gerber story begins with a powerful flush. Then come the timeless design, the enlarged footprint, and the extraordinary value. No matter what Gerber toilet you choose, you’ll find that our ...
-
Gerber TREYSTA™ Valve System - Tub and Shower Rough-in Valve Assembly Standard Installation and Thin Wall Installation Instructions
Use with trim kits for Gerber SAFETY TIPS: When using a solder alloy that has a tin content of greater than 95%, you may need to use more heat than can be supplied by using MAPP gas or propan...
-
How To Install And Adjust A Spray Hose Weight
How do I install and adjust the weight on my spray hose?This article will explain how to install and adjust the spray hose weight.To install the weight, you will need to: Install the weight on the ...
-
How to install Danze by Gerber and Gerber shower handle trim escutcheon plate?
How to install Gerber shower handle trim escutcheon plate? In addition to the traditional handle trim escutcheon plate installation method of using 2 screws to tighten in place, some of the Gerber ...
-
How do I install my lavatory faucet pop-up drain assembly?
This article will explain how to install a pop-up drain assembly in general. Always consult the installation included with your faucet for more specific types of pop-up drain assembly installation ...
-
How to remove Plymouth handle?
Pull out the rubber button (part #1). Use a hex wrench (part #4) to unscrew the set screw (part #2) counter-clockwise.The hex wrench is 2.5 mm head or 1/8". Then pull out the handle assembly (par...
-
How to remove Selene handle?
For Kitchen Faucets Pull away the handle cap to access the set screw, located at the underside of the handle. Use a hex wrench to unscrew counter-clockwise to loosen the set screw (part #1).Th...
-
How to remove Opulence handle?
Carefully identify which of these below types of handle is your Opulence faucet and follow the specific instructions for handle removal. Handle type 1: Use a hex wrench (part #4) to unscrew coun...